Release Note Exigo 1.3

From exigoWiki
Revision as of 09:36, 28 April 2017 by Gsorensen (talk | contribs)
Jump to navigation Jump to search

Exigo 1.3.2.10

Release status: Limited Availability, available on request.
Release date: 28.04.2017
Software collection file: EXIGO-1.3.2.10.zip

Software included in EXIGO-1.2.3.13.zip

For upgrade procedures, see PDF document included in each product folder inside the EXIGO-1.3.2.10.zip file; except VS-DEVICE-MIB, as this may vary between monitoring tools.

Product Version Product description
EXI-Firmware 4.3.2.10 Firmware for the following devices: ESC1(Secondary System Controller), ENA2200, ENA2400, ECPIR-3P, ECPIR-P, EAPIR-8, EAPFX-1, EAPFX-6, EAPII-1, EAPII-6, TKIS-2, TKIE-2
AlphaSys Firmware 12.3.2.9 Firmware for the ESC1 (Primary System Controller/AMC-IP board)
Exigo Management Tools 1.3.2.9001 Configuration tool, installed on a Windows PC
INCA Firmware 2.20.3.8 Software for the CRM-V based panel
VS-DEVICE-MIB 201610190000Z SNMP MIB for Exigo EXI-Devices, for upload in 3rd-party SNMP based monitoring tools



Improvements

New features

Backup Amplifier (AL-100)

  • One amplifier can be configured as a replacement for up to 6 other amplifiers.
  • The “replacement candidates” can be prioritized from 1 to 6, where 1 is highest priority; so if more than one replacement candidate is lost, the one with the highest priority will be replaced.
  • For details, see our wiki article

Alphacom and SIP integration (AL-38)

  • Exigo supports full Alphacom integration and integration with other SIP trunks.
  • Alphacom/SIP Integration is supporting single and AB systems
  • An Exigo system can be integrated with multiple Alphacom/SIP systems.
  • Alphacom/SIP connection link can be monitored by Exigo
  • Alphacom/SIP stations can start and control any pre-configured audio activity in Exigo
  • Exigo can send audio to Alphacom stations or groups
  • Exigo can send audio via the SIP trunk to SIP stations
  • Outgoing calls will have a priority translation from Exigo to standard SIP priorities.
  • Control outputs can be triggered by incoming calls from the Alphacom/SIP system.
  • For details about Alphacom integration, see our wiki article.
  • For details about the SIP integration, see our wiki article.