Difference between revisions of "Pulse Integration"
Jump to navigation
Jump to search
| Line 17: | Line 17: | ||
[[File:Exigo_Pulse_integration_3.png|thumb|left|600px|EMT SIP Trunk example]] | [[File:Exigo_Pulse_integration_3.png|thumb|left|600px|EMT SIP Trunk example]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | In | + | In the example above the IP address of the Pulse Server is 10.6.130.158. |
Revision as of 15:28, 7 November 2018
This article explains how to integrate a Pulse system with Exigo.
Integration with Pulse is based on SIP Trunk.
Pulse Configuration
Information regarding setting up a Pulse System can be found here.
In the Pulse System create a Pulse Trunk to the Exigo.
Go to Server Management -> Server Configuration -> Directory Settings:
On the Pulse Trunk the Action Calls in Exigo must be defined.
In the example above the Action Call (Directory Start) from 98001 to Action Call (Directory Stop) 98002 are defined.
Exigo Configuration
A SIP Trunk needs to be defined in Exigo Management Tool.
This is done by dragging SIP Trunk onto Integration:
In the example above the IP address of the Pulse Server is 10.6.130.158.
