Logging

This article describes the logging functionality available on the AMC-IP board (Primary System Controller).
Logging is something that can be very useful for troubleshooting.

Enabling Logging

Enabling logging is done on the AlphaWeb on the AMC-IP board (Primary System Controller).
Go to: System Configuration -> Logging

Enabling Logging

Here it is possible to enable all the different logging available:

• Debug Log
• System Log
• Call Statistics Log

Settings

Logging can be setup to:

• Local File system (Local file on AMC-IP)
• Local Serial port
• Remote Syslog (UDP/TCP)
• E-Mail
• SNMP Trap (MIB II)
• Or to all above simultaneously

To setup logging to one of the above press Edit.
You will then be able to choose the logging you want:

Enabling Logging

There are different priority levels available for the log.
In addition it is also possible to use the Contains area for filtering.
Here it is possible to add a word that needs to be part of the log-string.

When you have made your choices press Save Changes and then Apply.