Difference between revisions of "LED Brightness"
(→EMT Settings) |
(→Access Panels) |
||
| Line 19: | Line 19: | ||
On indoor access panels ([[ECPIR-P]] and [[ECPIR-3P]]) it is possible to set the LED brightness both locally and in [[:Category:EMT | EMT]]. | On indoor access panels ([[ECPIR-P]] and [[ECPIR-3P]]) it is possible to set the LED brightness both locally and in [[:Category:EMT | EMT]]. | ||
=== Local Adjustment === | === Local Adjustment === | ||
| − | + | The intensity of the LED and the backlight in the keys can be adjusted by pressing the dimmer button: | |
[[File:LED brightness 4.JPG|thumb|left|200px|LED brightness adjustment on indoor access panels]] | [[File:LED brightness 4.JPG|thumb|left|200px|LED brightness adjustment on indoor access panels]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| + | The light intensity is increased | ||
| + | or decreased by pressing the plus (+) or minus (-) side of the dimmer button respectively. | ||
=== EMT Settings === | === EMT Settings === | ||
It is also possible to set the LED brightness in [[:Category:EMT | EMT]].<br> | It is also possible to set the LED brightness in [[:Category:EMT | EMT]].<br> | ||
Revision as of 16:07, 5 December 2016
This article explains how to adjust the LED brightness on both central equipment (ESC1 & ENA) and indoor access panels.
Contents
Central Equipment
LED brightness can be adjusted both locally an in EMT.
Local Adjustment
On both the ESC1 and ENA the local LED setting can be found under Settings -> Display:
From this meny it is possible to adjust the LED brightness up and down.
It is also possible to test the LED's.
EMT Settings
It is also possible to set the LED brightness in EMT.
In the device tree go to the ESC1 or ENA -> LED:
For information regarding EMT vs local settings see this article.
Access Panels
On indoor access panels (ECPIR-P and ECPIR-3P) it is possible to set the LED brightness both locally and in EMT.
Local Adjustment
The intensity of the LED and the backlight in the keys can be adjusted by pressing the dimmer button:
The light intensity is increased
or decreased by pressing the plus (+) or minus (-) side of the dimmer button respectively.
EMT Settings
It is also possible to set the LED brightness in EMT.
In the device tree go to the ECPIR-P or ECPIR-3P -> LED:
For information regarding EMT vs local settings see this article.
