Difference between revisions of "LED Brightness"
Jump to navigation
Jump to search
(→Access Panels) |
|||
| Line 17: | Line 17: | ||
== Access Panels == | == Access Panels == | ||
| − | On indoor access panels ([[ECPIR-P]] and [[ECPIR-3P]]) | + | On indoor access panels ([[ECPIR-P]] and [[ECPIR-3P]]) it is possible to set the LED brightness both lacally and in |
Revision as of 15:45, 5 December 2016
This article explains how to adjust the LED brightness on both central equipment (ESC1 & ENA) and access panels.
Central Equipment
LED brightness can be adjusted both locally an in EMT.
Local Adjustment
On both the ESC1 and ENA the local LED setting can be found under Settings -> Display:
From this meny it is possible to adjust the LED brightness up and down.
It is also possible to test the LED's.
EMT Settings
It is also possible to set the LED brightness in EMT.
In the device tree go to the ESC1 or ENA -> LED:
For information regarding EMT vs local settings see this article.
Access Panels
On indoor access panels (ECPIR-P and ECPIR-3P) it is possible to set the LED brightness both lacally and in
