Fault Indication Advanced

From exigoWiki
Revision as of 12:17, 9 September 2016 by Gsorensen (talk | contribs) (Created page with "thumb|right|350px|Visual indication of fault in the system Control Outputs are configured by defining one or more actions to be triggered on a...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Visual indication of fault in the system

Control Outputs are configured by defining one or more actions to be triggered on an output event.

The Fault Indication Advanced function is used to trigger the control output with custom filter scripts.

This can be used to send a signal to external systems (like BMG (Building Management Systems). It can also be used to give visual notifications when there is fault in the system.

Assigning Fault Indication Advanced to a Control Output

To assign the function Fault Indication Advanced to an Control Output:

  1. In Components view, open Output Actions
  2. In System, identify the Controller, the Amplifier or the Access Panel to be used, and expand to Device > Control Outputs.
  3. Drag Fault Indication Advanced to the Control Output you want to use.