Difference between revisions of "FCDC3"

From exigoWiki
Jump to navigation Jump to search
Line 9: Line 9:
  
 
The Flowire Converter enables Ethernet to run on the same two wires as power, providing simpler cabling and opens up for longer cable hauls. The Flowire Converter is also capable of powering Ethernet devices attached to it, such as IP intercom stations or IP cameras.
 
The Flowire Converter enables Ethernet to run on the same two wires as power, providing simpler cabling and opens up for longer cable hauls. The Flowire Converter is also capable of powering Ethernet devices attached to it, such as IP intercom stations or IP cameras.
 +
 +
 +
== Highlights ==
 +
*[[FCDC-3#PoE-power_forwarding|PoE-power forwarding]] enable/disable by switch
 +
*Separate Power input –  isolated from the PLC bus
 +
*Several Flowire Clusters can be powered from same power supply
 +
*[[FCDC-3 - Backwards compatibility|Backwards compatible]] with FCDC1/2/TFIX after software upgrade
 +
*Replacement for [[FCDC-1]] and [[FCDC-2]]
 +
  
 
== Installation ==
 
== Installation ==

Revision as of 11:54, 3 February 2020

:FCDC3.
FCDC3

Flowire Ethernet Converter

  • One single-paired cable can be used to distribute power and data
  • The cable hauls can be longer than standard ethernet cabling, reducing the need for switches and/or repeaters
  • Up to 10 Flowire devices can be connected to the same 2-wire network structure
  • Existing infrastructure can be used, even though only a single pair is available, which reduces the total cost of retrofit projects
  • The Flowire Converter can be used with any Ethernet enabled device

The Flowire Converter enables Ethernet to run on the same two wires as power, providing simpler cabling and opens up for longer cable hauls. The Flowire Converter is also capable of powering Ethernet devices attached to it, such as IP intercom stations or IP cameras.


Highlights


Installation

Overview

Placement

Mounting