Difference between revisions of "Bypass Mode"
Jump to navigation
Jump to search
(→Configuration) |
Rrasmussen (talk | contribs) |
||
| Line 10: | Line 10: | ||
: - This is the default setting. | : - This is the default setting. | ||
* '''always_on:''' Amplifier will always route audio directly from line in to channel. | * '''always_on:''' Amplifier will always route audio directly from line in to channel. | ||
| − | |||
* '''idle_no_conn:''' Amplifier will route audio if no sound is being played from IP network or there is no server connection or device is not registered to server. | * '''idle_no_conn:''' Amplifier will route audio if no sound is being played from IP network or there is no server connection or device is not registered to server. | ||
* '''no_conn:''' Amplifier will route audio if there is no server connection or device is not registered to server. | * '''no_conn:''' Amplifier will route audio if there is no server connection or device is not registered to server. | ||
Revision as of 07:14, 13 September 2018
The Hardware Bypass functionality allows the line input on an ENA amplifier to be routed to the channel output.
Configuration
The setting for hardware bypass mode can be found under ENA amplifier -> Audio Lines -> Amplifier output channel:
- always_off: Routing is always disabled (except for devices with relay bypass only during boot).
- - This is the default setting.
- always_on: Amplifier will always route audio directly from line in to channel.
- idle_no_conn: Amplifier will route audio if no sound is being played from IP network or there is no server connection or device is not registered to server.
- no_conn: Amplifier will route audio if there is no server connection or device is not registered to server.
Availability
This function is available from Exigo 1.4 and newer.
