Difference between revisions of "Backup Request"
(→Assigning Backup Request to a Control Input) |
(→Configuration) |
||
| Line 8: | Line 8: | ||
== Configuration == | == Configuration == | ||
| − | + | * Drag-and-drop '''Backup Request''' to: | |
| − | + | '''Backup Amplifier''' -> '''Control Inputs''' -> '''CI_1-CI_6''' -> '''on_action/off_action''' | |
| − | |||
| − | |||
| − | |||
| − | |||
[[File:Backup request 3.JPG|thumb|left|500px|Assigning Backup Request to a Control Input]] | [[File:Backup request 3.JPG|thumb|left|500px|Assigning Backup Request to a Control Input]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 09:11, 3 May 2018
This article describe the Backup Request feature. This optional function may be used together with the Backup Amplifier function.
Backup Request is used to configure a control input on a backup amplifier to be able to replace the functions of the chosen failed amplifier.
The backup request is a feature to ensure an even faster switch-over if the defective amplifier has a power issue.
Contents
Configuration
- Drag-and-drop Backup Request to:
Backup Amplifier -> Control Inputs -> CI_1-CI_6 -> on_action/off_action
In this example, the backup amplifier will receive a Backup Request from ENA2200 1.
Parameter Details
Amplifier
The amplifier on which this Control Input will trigger the backup functionality.
Configuration on Amplifier that is being Backed Up
You also need to configure a control output on the amplifier that is being backed up:
- In System select the desired amplifier.
- Select the Control Output you want to use
- Set the Control Output to Normally Closed
Wire the Control Output on the amplifier to the Control Input on the backup amplifier.
If the amplifier loses power, the Control Output will open and the Backup Request functionality will trigger.
Availability
This function is available from Exigo 1.3 and later.
