Difference between revisions of "Analog radio integration"
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
===Wiring=== | ===Wiring=== | ||
[[File:RadioInterfaceExigo.png|500x250px|thumb|alt=Radio interface from ESC-1 to GM360|Radio interface from ESC-1 to GM360]] | [[File:RadioInterfaceExigo.png|500x250px|thumb|alt=Radio interface from ESC-1 to GM360|Radio interface from ESC-1 to GM360]] | ||
| − | Diagram shows wiring from ESC-1 to a GM360 radio. The same principle can be used for other radios from different manufcaturers. | + | Diagram shows wiring from ESC-1 to a GM360 radio. The same principle can be used for other radios from different manufcaturers. Other Exigo devices such as kits can be used instead of ESC-1 when required. This is especially useful when the radio is located far from the ESC-1. |
===Configuration=== | ===Configuration=== | ||
Radio integration is for Exigo the same as any other analog audio integration. | Radio integration is for Exigo the same as any other analog audio integration. | ||
| − | 1. | + | 1. Assign the line output to a zone. No other audio channels need to be part of this zone |
| − | 2. | + | [[File:RadioIntegrationAudioActivity.png|500x250px|thumb|alt=Control output programmed with Audio activity|Settings for audio activity when used for analog integration]] |
| + | 2. Program audio activity on the control output which is used. | ||
2a. With priority | 2a. With priority | ||
Revision as of 14:44, 5 April 2016
Exigo can be integrated with analoge radio solutions by using control outputs and control inputs.
Contents
Audio from Exigo to Radio using ESC-1
Audio from Exigo can be sent out on a radio. The radio will then be a special zone which are only used for radio.
Wiring
Diagram shows wiring from ESC-1 to a GM360 radio. The same principle can be used for other radios from different manufcaturers. Other Exigo devices such as kits can be used instead of ESC-1 when required. This is especially useful when the radio is located far from the ESC-1.
Configuration
Radio integration is for Exigo the same as any other analog audio integration.
1. Assign the line output to a zone. No other audio channels need to be part of this zone
2. Program audio activity on the control output which is used. 2a. With priority
Explain
