Live Speech

Live speech function

Live speech is the default PA function for sending audio from an access panel to a zone.

Settings

Parameters
Audio feedback	Where audio feedback should be played. Defaults to the access panel itself when Live speech is used on an access panel.
Activation	What should happen when this function is activated (start / stop / toggle)
Destination	Which zones should be part of this function.
Priority	Priority of this activity.
Chime	Which chime should be played before the live speech is activated.

Advanced Parameters
Wait for PTT	If the device should wait for a ptt press before starting. Used with handheld microphones
Volume	Volume adjustments on this activity.
Override pre-selected zones by zone select	Used if the function have static zones when zone select have not been activated.
On Busy	What should happen if a higher priority activity is alread active in one of the zones this activity is started in.
On Interrupt	What should happen if a higher priority activity takes one of the zones this activity is active in.
Release delay	How long the activity should stay in activity list after the activity is ended.
Timeout	Indicates time before the function will time out.
Escalation	Escaltion ID

Use cases:

Case 1: Normal live speech on PTT

When new access panel are added to a project they will have live speech ready on the ptt button. This is set up without zones and priority 21.

Adding a zone select button on a different dak key will allow this function to be used.

Case 2: Live speech with handheld microphone

Setting the live speech function to "wait for ptt" will allow a handheld microphone to be used. Triggering the function will prime the access panel, and the next press on hte handheld microphone will start the audio.

Availability

This function is available on Exigo 1.0 and newer.