SNMP Device MIB
Jump to navigation
Jump to search
This page briefly describes the content of the Vingtor-Stentofon MIB.
Supported devices
ECPIR-1P, ECPIR-3P, EAPIR-8, EAPFX-1, EAPFX-6, EAPII-1, EAPII-6, ESC-1, ENA2200, ENA2400, TKIS-2, TKIE-1
Contents
| Objects | Contents |
|---|---|
| Info | Contains information about the device such as name and type. |
| Temp | Contains information about the different temperature sensors available (ESC-1, ENA2200, ENA2400-DC) |
| Fan | Contains detailed information about the FANs (ESC-1, ENA2200, ENA2400-DC) |
| Voltage | Contains detailed information about the internal voltagess (ESC-1, ENA2200, ENA2400-DC) |
| Power | Contains information about how the device is powered and the current state of power sources. |
| Linein | Contains status of audio inputs and microphone inputs. |
| AmpChannel | Contains information and status of the amplifier modules (ENA2200 and ENA2400-DC) |
| LetStatus | Contains information and status about any Line End Transponders used in the system |
| ControlInput | Contains status, state and information about the control input. |
| ControlOutput | Contains status, state and information about the control output. |
| Eth | Contains information about the status of the network connections of the devices. |
| Relay | Contains infromation about the relays located on the access panels. |
Consult the MIB file itself for additional details.
Ethernet network state can also be monitored in MIB-2:
MIB-2->Interfaces->ifTable->ifEntry->ifOperStatus
Download
Download the MIB from the download page
