Optional Delay Setting

This article describes how to set audio delay on amplifier output.

For some projects for PA, it is required to set fixed, individual audio delay for each amplifier audio output.
This is done to compensate for the audio delay in a system which have loudspeakers mounted with some distanse from each other.
This way it is possible to increase the intelligibility (or STI value) in for example tunnel installations.

Please do remember that all SIP and ethernet based audio system will also have an internal delay.
The sound propagation in air will also bee influenced by temperature.
This means that to get the correct delay setting this must be measured.

Configuration

The playback delay setting is configured in EMT and is available for all Audio output lines on ENA's, ESC's, Kits and IP Speakers.

Optional Delay Settings

The delay can be set from 0 to 20000 ms.

 The delay setting will only work in Voice mode

Availability

This function is available from Exigo Management Tool 1.4.3.5 and newer.