Setting up a small A-B system

From exigoWiki
Revision as of 11:27, 22 August 2016 by Gsorensen (talk | contribs)
Jump to navigation Jump to search
Exigo small A-B system

This article will explain how to setup and configure a small Exigo A-B system.
System A will have one ESC1 Controller and two ENA2200 Amplifiers.
System B will have one ESC1 Controller and two ENA2200 Amplifiers.
In addition there will be one ECPR-3P connected to the system.
The system will be programmed with 4 Zones.
With the PPT button we will configure Live Speech on all zones.

Before you start configure make sure that all devices have been updated to the latest software/firmware.

Step 1: IP addresse

Each device will need to be configured with an IP address and subnet which is in range of the AMC-IP card.

Table below lists IP range for a small system with one amplifier and on access panel. All subnets are set to 255.255.255.0

Retrieved from "https://exigo.zenitel.com/w/index.php?title=Setting_up_a_small_A-B_system&oldid=4155"