Modbus Interface
Jump to navigation
Jump to search
This article describes the Modbus interface available in Exigo.
The Modbus Interface is not official implemented.
The Exigo Controller implements a Modbus TCP slave (server) interface on the standard Modbus port, TCP port 502. The Modbus interface in Exigo has two main features:
- Status about amplifiers and panels connected to the Controller can be read from Modbus 16 bit input registers
- Pre-programmed PA calls and announcements can be triggered by writing to Modbus coil registers.
Exigo status to Modbus
Availability
The Modbus functionality is not yet official implemented.
Please contact AlphaSupport if you are interested in the Modbus functionality.
