ENA2100-AC One Channel Mode
Revision as of 10:29, 10 January 2019 by Gsorensen (talk | contribs) (Created page with "The ENA2100-AC Amplifier supports One Channel Mode. When "One Channel mode" is activated, the two loudspeaker channels will play identical audio, and the audio will be in...")
The ENA2100-AC Amplifier supports One Channel Mode.
When "One Channel mode" is activated, the two loudspeaker channels will play identical audio, and the audio will be in phase.
One can then choose to use two separate loudspeaker loops, each with maximum 100W, or one can bridge the two output channels, and use one loudspeaker loop with up to 200W load.
Availability
This function is available from Exigo 1.4 and later.
