Release Note Exigo 1.4

Exigo 1.4.3.0

Release status: Coming soon
Release date: TBD
Software collection file: EXIGO-1.4.3.0.zip

Software included in EXIGO-1.4.3.0.zip

Product	Version	Product description
VSF-Turbine	VSFT-4.10.3.0	Firmware for the following devices: ESC1(Secondary System Controller), ENA2100, ENA2200, ENA2400, ECPIR-3P, ECPIR-P, EAPIR-8, EAPFX-1, EAPFX-6, EAPII-1, EAPII-6, TKIS-2, TKIE-2, IP-LCM.
AlphaSys Firmware	13.0.3.0	Firmware for the ESC1 (Primary System Controller/AMC-IP board)
VS-EMT Exigo Management Tools	EMT-1.4.3.0	Configuration tool, installed on a Windows PC
VSF-Inca	TBD	Special Exigo software for the CRM-V based panel
VS-DEVICE-MIB	TBD	SNMP MIB for Exigo EXI-Devices, for upload in 3rd-party SNMP based monitoring tools

New Features

IP-LCM support in Alphacom / Pulse / SIP

IP-LCM is now supported in Exigo systems. This device have:

• 8 robust high power relays
• 8 robust inputs
• Powered via the TKIS-2 kit with PoE, PoE inject or external power supply
• All connections and features from the TKIS-2 kit available

Exigo systems can now be integrated with Pulse systems

Using the SIP interface on Exigo systems allows for integration both ways to pulse systems

EMT - Scan IP range for devices now available

New tool in Operation view to scan an IP range for Exigo devices. From the list of discovered devices it is possible to send a command to the device to make the fault led blink (works for ENA, Access Panel and SSC devices).

By default, the fault led will blink 4 times, 2 blinks pr second. The number of blinks and blink rate can be changed in Options -> Configuration Options.

From the list of discovered devices it is also possible to open the device's Web Configuration page in the default browser.

SNMP traps are now supported by all Exigo devices

SNMP traps for faults are now supported by all Exigo devices. Configuration is done via EMT.

Exigo now supports distributed automatic volume controllers

Distributed Automatic Volume Controllers (dAVC) is TKIS-2 kits which measures background noise in an area and can adjust the volume settings for an amplifier or IP speaker so that the audio is audible above the noise.

• DAVC devices is monitored as other devices in the Exigo system.
• Zones with dAVC devices can have "volume override" functionality. Activities with priorities above this threshold will use full volume efficiently ignore background noise adjustments.
• DAVC Control of zone can be based on: highest, average or average mid. Both average require at least four dAVC devices.
• Disable AVC function can be used to selectively disable dAVC functionality per zone.
• Adjustment mode can be positive or negative between two thresholds.
• Advanced options where attack rate, decay rate, hysteresis and lock out time are available

ENA2100-AC is now supported in Exigo systems

• Advanced line monitoring and Lets supported
• Hardware audio bypass supported
• 2 control outputs with 200mA@24Vdc each
• 2 control inputs
• Supported in Exigo mode and Alphacom systems

New ZAP rpcs available for remote integration

• Restart of Class-D module
• Identification of devices by toggling fault led
• Remote toggling of control outputs