Pulse Integration

This article explains how to integrate a Pulse system with Exigo.

Integration with Pulse is based on SIP Trunk.

Pulse Configuration

Information regarding setting up a Pulse System can be found here.
In the Pulse System create a Pulse Trunk to the Exigo.
Go to Server Management -> Server Configuration -> Directory Settings:

Pulse Server Trunk example

On the Pulse Trunk the Action Calls in Exigo must be defined.
In the example above the Action Call (Directory Start) from 98001 to Action Call (Directory Stop) 98002 are defined.

Exigo Configuration

A SIP Trunk needs to be defined in Exigo Management Tool.
This is done by dragging SIP Trunk onto Integration:

EMT SIP Trunk example

In this example the the IP address of the Pulse Server is 10.6.130.158.