Follow Any Alarm Tone

From exigoWiki
Revision as of 10:37, 12 August 2016 by Gsorensen (talk | contribs)
Jump to navigation Jump to search
The control output follows the alarm tone in Zone 1

Control Outputs are configured by defining one or more actions to be triggered on an output event.

The Follow Any Alarm Tone funtion is used to trigger the control output to follow any alarm tone in one specific zone.


Assigning Follow Any Alarm Tone to a Control Output

To assign the function Follow Any Alarm Tone to an Control Output:

  1. In Components view, open Output Actions
  2. In System, identify the Controller, the Amplifier or the Access Panel to be used, and expand to Device > Control Outputs.
  3. Drag Follow Any Alarm Tone to the Control Output you want to use.
Assigning Fault Indication funtion to a Control Output


Configuration

Parameter details