Fault Relay Pulsing

From exigoWiki
Revision as of 12:08, 31 October 2019 by Gsorensen (talk | contribs) (Configuration)
Jump to navigation Jump to search

This article describes how to configure pulsing of the fault relay.
It is possible to have the fault relay of the ESC1 System Controller to pulse (turn off and on again) on new faults, or when faults reappear.

Configuration

Go to System and select the ESC1 Controller:

Pulse Fault Relay


Tick of Pulse Fault Relay to turn on the functionality.

Availability

This function is available from Exigo 1.4.3.4 and later.