Modbus Interface
Revision as of 09:37, 19 March 2019 by Gsorensen (talk | contribs) (Gsorensen moved page MODBUS Interface to Modbus Interface)
This article describes the Modbus interface available in Exigo.
The Modbus Interface is not official implemented.
The Exigo Controller implements a Modbus TCP slave (server) interface on the standard Modbus port, TCP port 502. The Modbus interface in Exigo has two main features:
- Status about amplifiers and panels connected to the Controller can be read from Modbus 16 bit input registers
- Pre-programmed PA calls and announcements can be triggered by writing to Modbus coil registers.