Bypass Mode
Jump to navigation
Jump to search
The Hardware Bypass functionality allows the line input on an ENA amplifier to be routed to the channel output.
Configuration
- always_on: Amplifier will always route audio directly from line in to channel.
- idle: Amplifier will route audio if no sound is being played from IP network.
- idle_no_conn: Amplifier will route audio if no sound is being played from IP network or there is no server connection or device is not registered to server.
- no_conn: Amplifier will route audio if there is no server connection or device is not registered to server.
Availability
This function is available from Exigo 1.4 and newer.
