Difference between revisions of "Redundant AlphaCom integration"
(→AlphaPro Configuration) |
(→AlphaPro Configuration) |
||
Line 49: | Line 49: | ||
Press '''OK'''. | Press '''OK'''. | ||
− | These steps must then be repeated for '''Controller B'''. | + | These steps must then be repeated for '''Controller B'''.<br> |
+ | After adding both controllers you should now have two Exigo nodes: | ||
+ | [[File:Alphacom integration net routing 4.JPG|thumb|left|500px|Net Routing - both controllers]] | ||
+ | <br style="clear:both;" /> | ||
=== Step 2. Define and set up the group which Exigo should call === | === Step 2. Define and set up the group which Exigo should call === |
Revision as of 10:35, 2 February 2017
This article explains how to setup and configure redundant AlphaCom integration on an Exigo A-B system.
The solution may also be used for Exigo system with hot-standby controller.
Contents
Configuration Overview
Exigo Management Tool (EMT) is used for setting up the integration from Exigo.
AlphaPro is used for setting up the integration from AlphaCom.
From Exigo there is two types of actions defined:
- Action Calls - from AlphaCom to Exigo.
- AlphaCom features - from Exigo to AlphaCom.
Exigo will use numbers from 98001 and upwards to start activities in Exigo on incoming activities. Outgoing from Exigo can define any number.
AlphaPro Configuration
Basic configuration on the AlphaCom contains two steps:
- Define and map IP addresses to the two Exigo Nodes (Controller A and Controller B).
- Define and set up the group which Exigo should call.
Step 1. Define and map IP addresses to the first Exigo Node (Controller A)
The following steps needs to be repeated for Controller B.
Select Create Exchange to create the first Exigo SIP node in your AlphaCom system:
Set the IP adress for the first Exigo PSC (Controller A) as the SIP Trunk Line:
Set up Net Routing:
Go to Exchange & System -> Net Routing:
Select Insert:
Select the Exigo node:
Select ACDP Link: SIP Link (31)
Press OK.
These steps must then be repeated for Controller B.
After adding both controllers you should now have two Exigo nodes:
Step 2. Define and set up the group which Exigo should call
In order to achieve redundancy the AlphaCom needs to call both controllers at the same time.
The next step is to add the directory numbers which are used in Exigo. These numbers are from 98001 to 98099:
Select Directory and Features:
Here you need to add the number of directory numbers/Action Calls you need.
Add a directory number 98001 with feature number 9 (Call a User).
This will give you a number that are automatically in All Call 84, and can also be added to groups.
Give the Directory Number a descriptive text in Display Text.
The User will look like this:
Check the SIP Station box.
The Related to Trunk must be set to the correct Exigo SIP Trunk.
EMT Configuration
Availability
This feature is available from Exigo 1.3.2.7 and newer.