Difference between revisions of "Configure ENSER-8"
Jump to navigation
Jump to search
(→Connecting to the switch) |
|||
| Line 2: | Line 2: | ||
This article explains the basics on how to configure the ENSER-8 (Cisco IE-3000-8TC). | This article explains the basics on how to configure the ENSER-8 (Cisco IE-3000-8TC). | ||
| − | == | + | == Connect to the switch == |
To configure the switch use the cable that came with the switch and connect to the '''console port'''. | To configure the switch use the cable that came with the switch and connect to the '''console port'''. | ||
Revision as of 15:03, 21 December 2016
This article explains the basics on how to configure the ENSER-8 (Cisco IE-3000-8TC).
Connect to the switch
To configure the switch use the cable that came with the switch and connect to the console port.
Use a terminal that supports serial, for example PuTTY
- Baud rate default is 9600
- Data bits default is 8
- Stop bits default is 1
- Parity settings default is none
