Difference between revisions of "Configure ENSER-8"
Jump to navigation
Jump to search
(→Connecting to the switch) |
|||
| Line 7: | Line 7: | ||
[[File:Configure enser 8 1.JPG |thumb|left|400px|IE-3000-8TC - Connection port]] | [[File:Configure enser 8 1.JPG |thumb|left|400px|IE-3000-8TC - Connection port]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | Use a terminal that supports serial, for example [http://www.chiark.greenend.org.uk/~sgtatham/putty/ PuTTY] | + | Use a terminal that supports serial, for example [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html PuTTY] |
* Baud rate default is 9600 | * Baud rate default is 9600 | ||
* Data bits default is 8 | * Data bits default is 8 | ||
Revision as of 15:02, 21 December 2016
This article explains the basics on how to configure the ENSER-8 (Cisco IE-3000-8TC).
Connecting to the switch
To configure the switch use the cable that came with the switch and connect to the console port.
Use a terminal that supports serial, for example PuTTY
- Baud rate default is 9600
- Data bits default is 8
- Stop bits default is 1
- Parity settings default is none
