ENA User Interface

ENA User Interface

This article describes how to use the GUI on the ENA amplifier. The user’s means of interaction with the amplifier is through the menu selection knob.
The knob is located next to the display and can be turned clockwise and counter clockwise, as well as being pressed.

Basic navigation

Items in the menu system are selected by turning the menu selection knob:

• Clockwise rotation will move the “selector” to the right or down
• Counter-clockwise rotation will move the “selector” to the left or up
  

Whether the selector is moved up/down or left/right depends on the current menu displayed.

• Press the menu selection knob to activate the selected menu item
• Press and hold the knob to return to the previous view
  

To change or input the parameter values in the selected menu item:
1. Turn the knob to move between the parameter fields
2. Press the knob to select the parameter field

• The field turns green to indicate that it is selected and ready for input value

3. Turn the knob to change the parameter value
4. Press the knob to select the parameter value

Access Control

Exigo has two pin code access levels.
The user need to press a 4 digit pin code to get access to the menu - when EMT is set up with menu access control.
The default access pins are:

• 1111 - Level 1 (User 1)
• 2222 - Level 2 (User 2)

Menu Structure

The menu is divided into three main categories: Service, Setting and Information.

Service

• Local Message List
• Headphone
• Tick Tone
• Audio Output State
• Backup Amplifier Control (only in Backup Amplifier menu)
• Restart & Restore

Settings

• General
• Audio Output Monitoring
• Audio Output Volume
• Audio Input Gain
• Display

Information

• Device Info
• Network
• Attached Devices
• Control Input
• Control Output
• Diagnostic

More detailed information regarding the user interface can be found in the [Exigo Technical Manual].