SNMP Device MIB

This page briefly describes the content of the Vingtor-Stentofon MIB.

Supported devices

ECPIR-1P, ECPIR-3P, EAPIR-8, EAPFX-1, EAPFX-6, EAPII-1, EAPII-6, ESC-1, ENA2200, ENA2400, TKIS-2, TKIE-1

Contents

Objects	Contents
Info	Contains information about the device such as name and type.
Temp	Contains information about the different temperature sensors available (ESC-1, ENA2200, ENA2400-DC)
Fan	Contains detailed information about the FANs (ESC-1, ENA2200, ENA2400-DC)
Voltage	Contains detailed information about the internal voltagess (ESC-1, ENA2200, ENA2400-DC)
Power	Contains information about how the device is powered and the current state of power sources.
Linein	Contains status of audio inputs and microphone inputs.
AmpChannel	Contains information and status of the amplifier modules (ENA2200 and ENA2400-DC)
LetStatus	Contains information and status about any Line End Transponders used in the system
ControlInput	Contains status, state and information about the control input.
ControlOutput	Contains status, state and information about the control output.
Eth	Contains information about the status of the network connections of the devices.
Relay	Contains infromation about the relays located on the access panels.

Consult the MIB file itself for additional details.

Ethernet network state can also be monitored in MIB-2: MIB-2->Interfaces->ifTable->ifEntry->ifOperStatus

Download

Download the MIB from the download page