Difference between revisions of "Release Note Exigo 1.4"

From exigoWiki
Jump to navigation Jump to search
(New Features)
Line 42: Line 42:
 
:* Powered via the TKIS-2 kit with PoE, PoE inject or external power supply
 
:* Powered via the TKIS-2 kit with PoE, PoE inject or external power supply
 
:* All connections and features from the TKIS-2 kit available
 
:* All connections and features from the TKIS-2 kit available
 +
 +
==== Exigo systems can now be integrated with Pulse systems ====
 +
: Using the SIP interface on Exigo systems allows for integration both ways to pulse systems
 +
 +
==== EMT - Scan IP range for devices now available ====
 +
: New tool in Operation view to scan an IP range for Exigo devices. From the list of discovered devices it is possible to send a command to the device to make the fault led blink (works for ENA, Access Panel and SSC devices).
 +
: By default, the fault led will blink 4 times, 2 blinks pr second. The number of blinks and blink rate can be changed in '''Options''' -> '''Configuration Options'''.
 +
: From the list of discovered devices it is also possible to open the device's Web Configuration page in the default browser.

Revision as of 10:59, 26 November 2018

Exigo 1.4.3.0

Release status: Coming soon
Release date: TBD
Software collection file: EXIGO-1.4.3.0.zip

Software included in EXIGO-1.4.3.0.zip

Product Version Product description
VSF-Turbine VSFT-4.10.3.0 Firmware for the following devices: ESC1(Secondary System Controller), ENA2100, ENA2200, ENA2400, ECPIR-3P, ECPIR-P, EAPIR-8, EAPFX-1, EAPFX-6, EAPII-1, EAPII-6, TKIS-2, TKIE-2, IP-LCM.
AlphaSys Firmware 13.0.3.0 Firmware for the ESC1 (Primary System Controller/AMC-IP board)
VS-EMT Exigo Management Tools EMT-1.4.3.0 Configuration tool, installed on a Windows PC
VSF-Inca TBD Special Exigo software for the CRM-V based panel
VS-DEVICE-MIB TBD SNMP MIB for Exigo EXI-Devices, for upload in 3rd-party SNMP based monitoring tools


New Features

IP-LCM support in Alphacom / Pulse / SIP

IP-LCM is now supported in Exigo systems. This device have:
  • 8 robust high power relays
  • 8 robust inputs
  • Powered via the TKIS-2 kit with PoE, PoE inject or external power supply
  • All connections and features from the TKIS-2 kit available

Exigo systems can now be integrated with Pulse systems

Using the SIP interface on Exigo systems allows for integration both ways to pulse systems

EMT - Scan IP range for devices now available

New tool in Operation view to scan an IP range for Exigo devices. From the list of discovered devices it is possible to send a command to the device to make the fault led blink (works for ENA, Access Panel and SSC devices).
By default, the fault led will blink 4 times, 2 blinks pr second. The number of blinks and blink rate can be changed in Options -> Configuration Options.
From the list of discovered devices it is also possible to open the device's Web Configuration page in the default browser.