Pulse Integration

This article explains how to integrate a Pulse system with Exigo.

Integration with Pulse is based on SIP Trunk.

Pulse Configuration

Information regarding setting up a Pulse System can be found here.
In the Pulse System create a Pulse Trunk to the Exigo.
Go to Server Management -> Server Configuration -> Directory Settings:

Pulse Server Trunk example

On the Pulse Trunk the Action Calls in Exigo must be defined.
In the example above the Action Call (Directory Start) from 98001 to Action Call (Directory Stop) 98002 are defined.

Exigo Configuration

A SIP Trunk needs to be defined in Exigo Management Tool.
In EMT go to Components -> External Devices.
This is done by dragging SIP Trunk onto Integration:

EMT SIP Trunk example

In the example above the IP address of the Pulse Server is 10.6.130.158.

From Exigo to Pulse System

By using Group Call(s) in Pulse it is possible to do announcement fro Exigo to Pulse System.
In the Pulse Server select the Station(s) which will be included in the Group Call:

Group Call example

In the example above the Station 158-TCIS-4 and 159-Master Station are included in the Group Call.

In EMT go to Components -> External Connetions.
Drag and drop SIP Device onto SIP Trunk:

ETM configuration example

In the example above Exigo will call Group 86 in the Pulse System.