Difference between revisions of "Bypass Mode"
Jump to navigation
Jump to search
(→Configuration) |
(→Configuration) |
||
| Line 4: | Line 4: | ||
* '''always_off:''' Routing is always disabled (except for devices with relay bypass only during boot). <br> | * '''always_off:''' Routing is always disabled (except for devices with relay bypass only during boot). <br> | ||
| − | + | : - This is the default setting. | |
* '''always_on:''' Amplifier will always route audio directly from line in to channel. | * '''always_on:''' Amplifier will always route audio directly from line in to channel. | ||
* '''idle:''' Amplifier will route audio if no sound is being played from IP network. | * '''idle:''' Amplifier will route audio if no sound is being played from IP network. | ||
Revision as of 09:31, 10 September 2018
The Hardware Bypass functionality allows the line input on an ENA amplifier to be routed to the channel output.
Configuration
- always_off: Routing is always disabled (except for devices with relay bypass only during boot).
- - This is the default setting.
- always_on: Amplifier will always route audio directly from line in to channel.
- idle: Amplifier will route audio if no sound is being played from IP network.
- idle_no_conn: Amplifier will route audio if no sound is being played from IP network or there is no server connection or device is not registered to server.
- no_conn: Amplifier will route audio if there is no server connection or device is not registered to server.
Availability
This function is available from Exigo 1.4 and newer.
