Difference between revisions of "VS-IMT Upgrade"

From exigoWiki
Jump to navigation Jump to search
(Prerequisites)
(Prerequisites)
Line 18: Line 18:
  
  
Run the [https://alpha.zenitel.com/index.php/VS-IMT_Station_Wizard station wizard] and perform the [https://alpha.zenitel.com/index.php/VS-IMT_Discover_Stations discovery] and the [[VS-IMT Identify Stations|identify]] process. The next step in the wizard will then be the upgrade section.
+
Run the [https://alpha.zenitel.com/index.php/VS-IMT_Station_Wizard station wizard] and perform the [https://alpha.zenitel.com/index.php/VS-IMT_Discover_Stations discovery] and the [https://alpha.zenitel.com/index.php/VS-IMT_Identify_Stations identify] process. The next step in the wizard will then be the upgrade section.
  
 
== Availability ==
 
== Availability ==

Revision as of 09:05, 24 October 2017

This article describes how to upgrade the software on Exigo devices to the latest version via the VS-IMT tool.

All Turbine based Exigo devices use the same software image:

  • Access Panels
  • Amplifiers
  • System Controller (SSC)
  • TKIE/TKIS kits
  • IP Speakers

Note that there is a separate upgrade procedure for the CRM-V IP Flush Master Station.

Note: Before you start configure the Exigo system it is important that all devices have been updated to the latest software/firmware. 
Use only software/firmware from the same Exigo package.

Prerequisites

  1. Download and install the VS-IMT tool
  2. Download the latest Exigo firmware/software package and unzip the folder (do not unzip the vsft-PA.x.x.x.x file).


Run the station wizard and perform the discovery and the identify process. The next step in the wizard will then be the upgrade section.

Availability

This function is available from Exigo 1.3.3 and newer. VS-IMT must be version 1.4.2.4 or newer.