Difference between revisions of "Setting up a small system"
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
!Dirctory number | !Dirctory number | ||
|- | |- | ||
| − | | | + | |PSC-A |
|10.1.0.21 | |10.1.0.21 | ||
| | | | ||
|- | |- | ||
| − | |ESC-1 | + | |ESC-1 A |
|10.1.0.20 | |10.1.0.20 | ||
|013010 | |013010 | ||
|- | |- | ||
| − | | | + | |ENA - A |
|10.1.0.30 | |10.1.0.30 | ||
|012010 | |012010 | ||
Revision as of 13:20, 18 April 2016
This page will explain how to configure and test a small Exigo system.
Step 1: IP addresse
Each device will need to be configured with an IP address and subnet which is in range of the AMC-IP card.
| Device | IP | Dirctory number |
|---|---|---|
| PSC-A | 10.1.0.21 | |
| ESC-1 A | 10.1.0.20 | 013010 |
| ENA - A | 10.1.0.30 | 012010 |
| ECPIR-3P | 10.1.0.50 | 011010 |
Step 2: something else
Blah blah
