Difference between revisions of "Analog radio integration"
(Tag: Visual edit) |
|||
| Line 9: | Line 9: | ||
[[File:Radio Interface Exigo.JPG|600px|thumb|left|alt=Radio interface from ESC-1 to GM360|Radio interface from ESC1 to GM360]] | [[File:Radio Interface Exigo.JPG|600px|thumb|left|alt=Radio interface from ESC-1 to GM360|Radio interface from ESC1 to GM360]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | + | The diagram shows wiring from the ESC1 System Controller to a GM360 radio. The same principle can be used for radios from other manufacturers.<br> | |
| − | Other Exigo devices such as kits can be used instead of ESC1 when | + | Other Exigo devices such as kits can be used instead of the ESC1 when necessary. This is especially useful when the radio is located far from the ESC1 System Controller. |
== Configuration == | == Configuration == | ||
| Line 21: | Line 21: | ||
2a. In Zone add the zone which contains the line output.<br> | 2a. In Zone add the zone which contains the line output.<br> | ||
2b. Set priority range to 1-100. All audio sent to the radio zone will now trigger the control output which will key the radio. | 2b. Set priority range to 1-100. All audio sent to the radio zone will now trigger the control output which will key the radio. | ||
| − | |||
| − | |||
| − | |||
[[Category:Integration]] | [[Category:Integration]] | ||
[[Category:Getting started]] | [[Category:Getting started]] | ||
Revision as of 09:36, 14 December 2016
This article describes how to set up analog radio integration in Exigo.
Exigo can be integrated with analog radio solutions by using control outputs and control inputs.
Audio from Exigo to Radio using ESC1
Audio from Exigo can be sent out on a radio. The radio will then be a special zone which are only used for radio.
Wiring
The diagram shows wiring from the ESC1 System Controller to a GM360 radio. The same principle can be used for radios from other manufacturers.
Other Exigo devices such as kits can be used instead of the ESC1 when necessary. This is especially useful when the radio is located far from the ESC1 System Controller.
Configuration
Radio integration is for Exigo the same as any other analog audio integration.
1. Assign the line output to a zone. No other audio channels need to be part of this zone
2. Program audio activity on the control output which is used.
2a. In Zone add the zone which contains the line output.
2b. Set priority range to 1-100. All audio sent to the radio zone will now trigger the control output which will key the radio.
