Difference between revisions of "EMT vs Local Settings"

From exigoWiki
Jump to navigation Jump to search
(Corrected description of changing local settings)
Line 10: Line 10:
 
Initially all of these will be given settings from EMT the first time a configuration are sent from EMT.
 
Initially all of these will be given settings from EMT the first time a configuration are sent from EMT.
  
If local adjustments then are done on ESC1 or ENA amplifier this will be overwritten when a new configuration are sent from EMT.
+
If local adjustments then are done on ESC1 or ENA amplifier, it will be impossible to change them from EMT until a '''GET'''  
 
 
In order to keep local settings in the configuration you need to do a '''Get''' in EMT.
 
  
 +
has been done from EMT. This will download the database, with it's local changes, from the PSC, and display them in EMT.
  
 +
EMT now has the privilige to perform local changes again.
 
[[Category:Exigo features]]
 
[[Category:Exigo features]]
 
[[Category:Troubleshooting]]
 
[[Category:Troubleshooting]]

Revision as of 15:53, 14 December 2016

EMT Send/Get Operation

This article describe how Exigo handles the settings that are available both locally and in EMT.

There is setting that can be done both in EMT an locally on an amplifier or controller.
The local settings are:

  • Audio Output Channel Volume (ENA Amplifiers)
  • Line / Mic Gain
  • Audio Output Volume (ESC1 Controller)

Initially all of these will be given settings from EMT the first time a configuration are sent from EMT.

If local adjustments then are done on ESC1 or ENA amplifier, it will be impossible to change them from EMT until a GET

has been done from EMT. This will download the database, with it's local changes, from the PSC, and display them in EMT.

EMT now has the privilige to perform local changes again.