Difference between revisions of "EMT vs Local Settings"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
* Audio Output Channel Volume (ENA Amplifiers) | * Audio Output Channel Volume (ENA Amplifiers) | ||
* Line / Mic Gain | * Line / Mic Gain | ||
| − | * Audio Output Volume ( | + | * Audio Output Volume (ESC1 Controller) |
Initially all of these will be given settings from EMT the first time a configuration are sent from EMT. | Initially all of these will be given settings from EMT the first time a configuration are sent from EMT. | ||
Revision as of 11:46, 12 December 2016
This article describe how Exigo handles the settings that are available both locally and in EMT.
There is setting that can be done both in EMT an locally on an amplifier or controller.
The local settings are:
- Audio Output Channel Volume (ENA Amplifiers)
- Line / Mic Gain
- Audio Output Volume (ESC1 Controller)
Initially all of these will be given settings from EMT the first time a configuration are sent from EMT.
If local adjustments then are done on ESC-1 or ENA amplifier this will be overwritten when a new configuration are sent from EMT.
In order to keep local settings in the configuration you need to do a Get in EMT.
