Difference between revisions of "Flowire Monitoring"

From exigoWiki
Jump to navigation Jump to search
(Flowire Configuration)
(Flowire Configuration)
Line 22: Line 22:
 
If there is no DHCP server on the network, the Flowire units will by default have a static IP address 169.254.1.10.  
 
If there is no DHCP server on the network, the Flowire units will by default have a static IP address 169.254.1.10.  
 
* Go to the Web interface of the Flowire
 
* Go to the Web interface of the Flowire
[[File:Flowire monitoring 3.JPG|thumb|left|600px|Flowire Web Interface]]
+
[[File:Flowire monitoring 3.JPG|thumb|left|500px|Flowire Web Interface]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
 
Next press the '''Upgrade form''' button.
 
Next press the '''Upgrade form''' button.
  
[[File:Flowire monitoring 4.JPG|thumb|left|600px|Flowire Web Interface]]
+
[[File:Flowire monitoring 4.JPG|thumb|left|500px|Flowire Web Interface]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
 
Next press the '''Exigo form''' button.
 
Next press the '''Exigo form''' button.
  
[[File:Flowire monitoring 5.JPG|thumb|left|600px|Flowire Web Interface]]
+
[[File:Flowire monitoring 5.JPG|thumb|left|400px|Flowire Web Interface]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
 
This is where the configuration of the Flowire is done.<br>
 
This is where the configuration of the Flowire is done.<br>
 
'''DOMAIN_ADDRESS:''' This is the IP address for the Primary System Controller (PSC).  
 
'''DOMAIN_ADDRESS:''' This is the IP address for the Primary System Controller (PSC).  
  
'''DOMAIN_PORT:''' This is the ZAP port being
+
'''DOMAIN_PORT:''' This is the ZAP port being used by Exigo. The default port is 50004.
  
 
'''USERNAME:''' The first Flowire will have '''flow001''', the next '''flow002''' and so on
 
'''USERNAME:''' The first Flowire will have '''flow001''', the next '''flow002''' and so on

Revision as of 05:46, 14 September 2016

This article describe how to enable monitoring for the Flowires that are connected to the system.
It is possible to monitor the Flowires that are connected to the system.
This will give a better error reporting and easier troubleshooting if an error should occur.

EMT Configuration

Monitoring of the Flowires must be configured using EMT.

  • Go to Configuration view
  • In the device tree go to System -> Flowires
EMT - Flowires


Select the Add button (beside the trashcan) to add a new Flowire to the system.

EMT - Flowires


Feature: This is automatically generated by EMT. The first Flowire will have flow001, the next flow002 and so on.

Display Name: It is recomended to give the Flowires a descriptive name. The name will be displayed in the fault list if a Flowire looses connection.
A good descriptive name will make it easier to troubleshoot if an fault occurs.

Flowire Configuration

Configuration of the Flowire is done thru the Web interface of the Flowire.
If there is no DHCP server on the network, the Flowire units will by default have a static IP address 169.254.1.10.

  • Go to the Web interface of the Flowire
Flowire Web Interface


Next press the Upgrade form button.

Flowire Web Interface


Next press the Exigo form button.

Flowire Web Interface


This is where the configuration of the Flowire is done.
DOMAIN_ADDRESS: This is the IP address for the Primary System Controller (PSC).

DOMAIN_PORT: This is the ZAP port being used by Exigo. The default port is 50004.

USERNAME: The first Flowire will have flow001, the next flow002 and so on