Difference between revisions of "Optional Delay Setting"
Jump to navigation
Jump to search
(→Configuration) |
(→Configuration) |
||
Line 13: | Line 13: | ||
The delay can be set from '''0''' to '''20000 ms'''. | The delay can be set from '''0''' to '''20000 ms'''. | ||
− | Note | + | {{Note}} The delay setting will only work in Voice mode |
== Availability == | == Availability == |
Revision as of 10:32, 13 December 2019
This article describes how to set audio delay on amplifier output.
For some projects for PA, it is required to set fixed, individual audio delay for each amplifier audio output.
This is done to compensate for the audio delay in a system which have loudspeakers mounted with some distanse from each other.
This way it is possible to increase the intelligibility (or STI value) in for example tunnel installations.
Configuration
The playback delay setting is configured in EMT and is available for all Audio output lines on ENA's, ESC's, Kits and IP Speakers.
The delay can be set from 0 to 20000 ms.
The delay setting will only work in Voice mode
Availability
This function is available from Exigo Management Tool 1.4.3.5 and newer.