Difference between revisions of "Pulse Integration"
(→From Exigo to Pulse System) |
(→From Exigo to Pulse System) |
||
| Line 24: | Line 24: | ||
[[File:Exigo_Pulse_integration_2.png|thumb|left|600px|Group Call example]] | [[File:Exigo_Pulse_integration_2.png|thumb|left|600px|Group Call example]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | In the example above the Station 158 | + | In the example above the Station 158-TCIS-4 and 159-Master Station are included in the Group Call |
Revision as of 14:46, 7 November 2018
This article explains how to integrate a Pulse system with Exigo.
Integration with Pulse is based on SIP Trunk.
Pulse Configuration
Information regarding setting up a Pulse System can be found here.
In the Pulse System create a Pulse Trunk to the Exigo.
Go to Server Management -> Server Configuration -> Directory Settings:
On the Pulse Trunk the Action Calls in Exigo must be defined.
In the example above the Action Call (Directory Start) from 98001 to Action Call (Directory Stop) 98002 are defined.
Exigo Configuration
A SIP Trunk needs to be defined in Exigo Management Tool.
This is done by dragging SIP Trunk onto Integration:
In the example above the IP address of the Pulse Server is 10.6.130.158.
From Exigo to Pulse System
By using Group Call(s) in Pulse it is possible to do announcement fro Exigo to Pulse System.
In the Pulse Server select the Station(s) which will be included in the Group Call:
In the example above the Station 158-TCIS-4 and 159-Master Station are included in the Group Call
