Difference between revisions of "Pulse Integration"
Jump to navigation
Jump to search
(→Exigo Configuration) |
|||
| Line 16: | Line 16: | ||
A SIP Trunk needs to be defined in Exigo Management Tool. <br> | A SIP Trunk needs to be defined in Exigo Management Tool. <br> | ||
This is done by dragging '''SIP Trunk''' onto '''Integration''': | This is done by dragging '''SIP Trunk''' onto '''Integration''': | ||
| − | [[File: | + | [[File:Exigo_Pulse_integration_3.png|thumb|left|600px|EMT SIP Trunk example]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 14:26, 7 November 2018
This article explains how to integrate a Pulse system with Exigo.
Integration with Pulse is based on SIP Trunk.
Pulse Configuration
Information regarding setting up a Pulse System can be found here.
In the Pulse System create a Pulse Trunk to the Exigo.
Go to Server Management -> Server Configuration -> Directory Settings:
On the Pulse Trunk the Action Calls in Exigo must be defined.
In the example above the Action Call (Directory Start) from 98001 to Action Call (Directory Stop) 98002 are defined.
Exigo Configuration
A SIP Trunk needs to be defined in Exigo Management Tool.
This is done by dragging SIP Trunk onto Integration:
