Difference between revisions of "Setting up a small system"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
==Step 1: IP addresse== | ==Step 1: IP addresse== | ||
Each device will need to be configured with an IP address and subnet which is in range of the AMC-IP card. | Each device will need to be configured with an IP address and subnet which is in range of the AMC-IP card. | ||
| + | |||
| + | Table below lists IP range for a small system with one amplifier and on access panel. All subnets are set to 255.255.255.0 | ||
{| class="wikitable" | {| class="wikitable" | ||
!Device | !Device | ||
Revision as of 13:20, 18 April 2016
This page will explain how to configure and test a small Exigo system.
Step 1: IP addresse
Each device will need to be configured with an IP address and subnet which is in range of the AMC-IP card.
Table below lists IP range for a small system with one amplifier and on access panel. All subnets are set to 255.255.255.0
| Device | IP | Dirctory number |
|---|---|---|
| PSC-A | 10.1.0.21 | |
| ESC-1 A | 10.1.0.20 | 013010 |
| ENA - A | 10.1.0.30 | 012010 |
| ECPIR-3P | 10.1.0.50 | 011010 |
Step 2: something else
Blah blah
