Difference between revisions of "Setting up a small system"
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
!IP | !IP | ||
!Dirctory number | !Dirctory number | ||
| + | |- | ||
| + | |PSC1 | ||
| + | |10.1.0.21 | ||
| + | |'-' | ||
|- | |- | ||
|ESC-1 | |ESC-1 | ||
Revision as of 13:19, 18 April 2016
This page will explain how to configure and test a small Exigo system.
Step 1: IP addresse
Each device will need to be configured with an IP address and subnet which is in range of the AMC-IP card.
| Device | IP | Dirctory number |
|---|---|---|
| PSC1 | 10.1.0.21 | '-' |
| ESC-1 | 10.1.0.20 | 013010 |
| Ena | 10.1.0.30 | 012010 |
| ECPIR-3P | 10.1.0.50 | 011010 |
Step 2: something else
Blah blah
