Difference between revisions of "Analog radio integration"

From exigoWiki
Jump to navigation Jump to search
(Created page with "Category:Integration Exigo can be integrated with analoge radio solutions by using control outputs and control inputs. ==Audio from Exigo to Radio using ESC-1== Audio fr...")
 
(Configuration)
 
(21 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[Category:Integration]]
 
  
Exigo can be integrated with analoge radio solutions by using control outputs and control inputs.
+
This article describes how to set up analog radio integration in Exigo.<br>
 +
Exigo can be integrated with analog radio solutions by using control outputs and control inputs.
  
==Audio from Exigo to Radio using ESC-1==
+
== Audio from Exigo to Radio using ESC1 ==
 
Audio from Exigo can be sent out on a radio. The radio will then be a special zone which are only used for radio.
 
Audio from Exigo can be sent out on a radio. The radio will then be a special zone which are only used for radio.
  
 
===Wiring===
 
===Wiring===
[[File:RadioInterfaceExigo.png|500x250px|thumb|center|alt=Radio interface from ESC-1 to GM360|Radio interface from ESC-1 to GM360]]
+
[[File:Radio Interface Exigo.JPG|600px|thumb|left|alt=Radio interface from ESC-1 to GM360|Radio interface from ESC1 to GM360]]
 +
<br style="clear:both;" />
 +
The diagram shows wiring from the ESC1 System Controller to a GM360 radio. The same principle can be used for radios from other manufacturers.<br>
 +
Other Exigo devices such as kits can be used instead of the ESC1 when necessary. This is especially useful when the radio is located far from the ESC1 System Controller.
  
===Configuration===
+
== Configuration ==
Configuration example
+
Radio integration in Exigo is the same as for any other analog audio integration.
  
 +
To configure radio integration in EMT:
  
 +
1. Assign the line output to a zone. No other audio channels need to be part of this zone
 +
[[File:RadioIntegrationAudioActivity.png|500px|thumb|left|alt=Control output programmed with Audio activity|Settings for audio activity when used for analog integration]]
 +
<br style="clear:both;" />
 +
2. Program '''Audio Activity''' on the control output that is used.<br>
 +
2a. In the '''Zone''' field, select the zone that contains the line output.<br>
 +
2b. Set the '''Priority Range''' to '''1-100'''.
  
 +
All audio sent to the radio zone will now trigger the control output that will key the radio.
  
==Audio from Radio to Exigo==
+
[[Category:Integration]]
 +
[[Category:Getting started]]

Latest revision as of 09:44, 14 December 2016

This article describes how to set up analog radio integration in Exigo.
Exigo can be integrated with analog radio solutions by using control outputs and control inputs.

Audio from Exigo to Radio using ESC1

Audio from Exigo can be sent out on a radio. The radio will then be a special zone which are only used for radio.

Wiring

Radio interface from ESC-1 to GM360
Radio interface from ESC1 to GM360


The diagram shows wiring from the ESC1 System Controller to a GM360 radio. The same principle can be used for radios from other manufacturers.
Other Exigo devices such as kits can be used instead of the ESC1 when necessary. This is especially useful when the radio is located far from the ESC1 System Controller.

Configuration

Radio integration in Exigo is the same as for any other analog audio integration.

To configure radio integration in EMT:

1. Assign the line output to a zone. No other audio channels need to be part of this zone

Control output programmed with Audio activity
Settings for audio activity when used for analog integration


2. Program Audio Activity on the control output that is used.
2a. In the Zone field, select the zone that contains the line output.
2b. Set the Priority Range to 1-100.

All audio sent to the radio zone will now trigger the control output that will key the radio.