Difference between revisions of "EAPFX Restore Factory Defaults"
Jump to navigation
Jump to search
(→Reset to Factory Default Settings with Static IP) |
|||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
A EX access panel may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP. | A EX access panel may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP. | ||
| − | + | {{Note}} A EAPFX Factory Default will also reset the Flowire NMK password. See [[Exigo_Flowire_Guidelines#Network_Management_Key_.28NMK.29_Configuration|here for more]] | |
| + | |||
| + | == Preparation == | ||
| + | # Connect a loudspeaker (8 ohms or higher) to the speaker output | ||
== Reset to Factory Default Settings with Activated DHCP == | == Reset to Factory Default Settings with Activated DHCP == | ||
| − | [[File:EAPFX factory default1.PNG|thumb| | + | [[File:EAPFX factory default1.PNG|thumb|200px|Factory Default with IP address from DHCP server]] |
To reset: | To reset: | ||
:1. While '''pressing any button''', power up the station. | :1. While '''pressing any button''', power up the station. | ||
| Line 20: | Line 23: | ||
== Reset to Factory Default Settings with Static IP == | == Reset to Factory Default Settings with Static IP == | ||
| − | [[File:EAPFX factory default2.PNG|thumb| | + | [[File:EAPFX factory default2.PNG|thumb|200px|Factory Default with Static IP Address]] |
To reset: | To reset: | ||
:1. While '''pressing any button''', power up the station. | :1. While '''pressing any button''', power up the station. | ||
Latest revision as of 10:03, 8 May 2018
A EX access panel may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.
A EAPFX Factory Default will also reset the Flowire NMK password. See here for more
Preparation
- Connect a loudspeaker (8 ohms or higher) to the speaker output
Reset to Factory Default Settings with Activated DHCP
To reset:
- 1. While pressing any button, power up the station.
- 2. Hold the button until the station audio starts counting, and release the button on count 1.
- 3. Press and hold the button on count 5 and release on count 0.
- - if there is no 0 count, the procedure has failed and you have to start again
- 4. Press the call button to make the station say its IP address.
Factory default values
- Station IP address: (determined by DHCP server)
- Username: admin
- Password: alphaadmin
Reset to Factory Default Settings with Static IP
To reset:
- 1. While pressing any button, power up the station.
- 2. Hold the button until the station audio starts counting, and release the button on count 1.
- 3. Press and hold the button on count 3 and release on count 0.
- - if there is no 0 count, the procedure has failed and you have to start again
- 4. Press the call button to make the station say its IP address.
Factory default values
- Station IP address: 169.254.1.100
- Username: admin
- Password: alphaadmin
