Difference between revisions of "Release Note Exigo 1.3"
Jump to navigation
Jump to search
(→New Functionality) |
(→New Functionality) |
||
| Line 71: | Line 71: | ||
=== Auto mute function (AL-1372, AL-1823) === | === Auto mute function (AL-1372, AL-1823) === | ||
IP speakers and all other audio channels can be configured to be digitally muted based on activity in the system | IP speakers and all other audio channels can be configured to be digitally muted based on activity in the system | ||
| + | |||
| + | === Multiple escalation functions for each function added (AL-1960) === | ||
| + | |||
| + | === Adjustable timeout for Recall, Record (AL-1064) === | ||
| + | |||
| + | === Remote activation of microphones (AL-2734) === | ||
Revision as of 08:43, 28 April 2017
Contents
Exigo 1.3.2.10
Release status: Limited Availability, available on request. Release date: 28.04.2017 Software collection file: EXIGO-1.3.2.10.zip
Software included in EXIGO-1.2.3.13.zip
For upgrade procedures, see PDF document included in each product folder inside the EXIGO-1.3.2.10.zip file; except VS-DEVICE-MIB, as this may vary between monitoring tools.
| Product | Version | Product description |
| EXI-Firmware | 4.3.2.10 | Firmware for the following devices: ESC1(Secondary System Controller), ENA2200, ENA2400, ECPIR-3P, ECPIR-P, EAPIR-8, EAPFX-1, EAPFX-6, EAPII-1, EAPII-6, TKIS-2, TKIE-2 |
| AlphaSys Firmware | 12.3.2.9 | Firmware for the ESC1 (Primary System Controller/AMC-IP board) |
| Exigo Management Tools | 1.3.2.9001 | Configuration tool, installed on a Windows PC |
| INCA Firmware | 2.20.3.8 | Software for the CRM-V based panel |
| VS-DEVICE-MIB | 201610190000Z | SNMP MIB for Exigo EXI-Devices, for upload in 3rd-party SNMP based monitoring tools |
New features
Backup Amplifier (AL-100)
- One amplifier can be configured as a replacement for up to 6 other amplifiers.
- The “replacement candidates” can be prioritized from 1 to 6, where 1 is highest priority; so if more than one replacement candidate is lost, the one with the highest priority will be replaced.
- For details, see our wiki article
Alphacom and SIP integration (AL-38)
- Exigo supports full Alphacom integration and integration with other SIP trunks.
- Alphacom/SIP Integration is supporting single and AB systems
- An Exigo system can be integrated with multiple Alphacom/SIP systems.
- Alphacom/SIP connection link can be monitored by Exigo
- Alphacom/SIP stations can start and control any pre-configured audio activity in Exigo
- Exigo can send audio to Alphacom stations or groups
- Exigo can send audio via the SIP trunk to SIP stations
- Outgoing calls will have a priority translation from Exigo to standard SIP priorities.
- Control outputs can be triggered by incoming calls from the Alphacom/SIP system.
- For details about Alphacom integration, see our wiki article.
- For details about the SIP integration, see our wiki article.
IP speaker support (AL-52, AL-53)
- Exigo supports 200 IP speakers
- IP speakers are now a separate device in EMT
New Functionality
Turbine Extended kit support (AL-83)
- The Turbine Extended kit (TKIE-1/2) is now fully supported and can be configured in EMT.
Flowire Monitoring (AL-1306)
- For details, see our wiki article.
Auto mute function (AL-1372, AL-1823)
IP speakers and all other audio channels can be configured to be digitally muted based on activity in the system
