Difference between revisions of "Flowire Monitoring"

From exigoWiki
Jump to navigation Jump to search
(EMT Configuration)
(EMT Configuration)
Line 9: Line 9:
 
[[File:Flowire monitoring 1.JPG|thumb|left|800px|EMT - Flowires]]
 
[[File:Flowire monitoring 1.JPG|thumb|left|800px|EMT - Flowires]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
 +
Select the '''Add''' button (beside the trashcan) to add a new Flowire to the system.
  
 +
[[File:Flowire monitoring 2.JPG|thumb|left|800px|EMT - Flowires]]
 +
<br style="clear:both;" />
 
'''Feature:''' This is automatically generated by EMT. The first Flowire will have '''flow001''', the next '''flow002''' and so on.
 
'''Feature:''' This is automatically generated by EMT. The first Flowire will have '''flow001''', the next '''flow002''' and so on.
  

Revision as of 11:34, 13 September 2016

This article describe how to enable monitoring for the Flowires that are connected to the system.
It is possible to monitor the Flowires that are connected to the system.
This will give a better error reporting and easier troubleshooting is an error should occur.

EMT Configuration

Monitoring of the Flowires must be configured using EMT.

  • Go to Configuration view
  • In the device tree go to System -> Flowires
EMT - Flowires


Select the Add button (beside the trashcan) to add a new Flowire to the system.

EMT - Flowires


Feature: This is automatically generated by EMT. The first Flowire will have flow001, the next flow002 and so on.

Display Name: It is recomended to give the Flowires a descriptive name. The name will be displayed in the fault list if a Flowire looses connection.
A good descriptive name will make it easier to troubleshoot if an fault occurs.