Difference between revisions of "Flowire Monitoring"

From exigoWiki
Jump to navigation Jump to search
(Created page with "This article describe how to enable monitoring for the Flowires that are connected to the system.<br> It is possible to monitor the Flowire(s) that are connected to the system...")
 
Line 1: Line 1:
 
This article describe how to enable monitoring for the Flowires that are connected to the system.<br>
 
This article describe how to enable monitoring for the Flowires that are connected to the system.<br>
It is possible to monitor the Flowire(s) that are connected to the system.<br>
+
It is possible to monitor the Flowires that are connected to the system.<br>
 
This will give a better error reporting and easier troubleshooting is an error should occur.
 
This will give a better error reporting and easier troubleshooting is an error should occur.
  
 
== EMT Configuration ==
 
== EMT Configuration ==
 +
Monitoring of the Flowires must be configured using EMT.<br>
 +
* Go to '''Configuration''' view
 +
* In the device tree go to '''System''' -> '''Flowires'''
 +
[[File:Flowire monitoring 1.JPG|thumb|left|500px|EMT - Flowires]]
 +
<br style="clear:both;" />
  
  

Revision as of 11:17, 13 September 2016

This article describe how to enable monitoring for the Flowires that are connected to the system.
It is possible to monitor the Flowires that are connected to the system.
This will give a better error reporting and easier troubleshooting is an error should occur.

EMT Configuration

Monitoring of the Flowires must be configured using EMT.

  • Go to Configuration view
  • In the device tree go to System -> Flowires
EMT - Flowires