Difference between revisions of "Secondary System Controller Update"

From exigoWiki
Jump to navigation Jump to search
(Upgrade using the Web Interface)
(Upgrade using the Web Interface)
Line 21: Line 21:
 
[[File:TFTP_Server_1.png|thumb|left|500px|TFTP32]]
 
[[File:TFTP_Server_1.png|thumb|left|500px|TFTP32]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
* Log on to the Secondary System Controller web interface. Default login credentials are '''admin''' and '''alphaadmin'''. Select Station Administration > Manual Upgrade
+
* Log on to the '''Secondary System Controller''' web interface. Default login credentials are '''admin''' and '''alphaadmin'''. Select Station Administration > Manual Upgrade
 
* Enter the IP address of the TFTP server (I.e. the IP address of your PC)
 
* Enter the IP address of the TFTP server (I.e. the IP address of your PC)
 
* Enter the image file: exi-x.x.x.x, and click Save settings  
 
* Enter the image file: exi-x.x.x.x, and click Save settings  

Revision as of 14:09, 29 June 2016

System Controller Simplified Block Diagram

The Exigo System Controller consist of two main components:

  • Primary System Controller, PSC
  • Secondary System Controller, SSC

This article describes how to upgrade the software on the Secondary System Controller part of the Exigo System Controller. The Secondary System Controller is also called Turbine Board.


Upgrade using the Web Interface

Prerequisites

  1. A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html
  2. Download the latest Exigo firmware/software package and unzip the folder.
  3. Check if your local firewall is not blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process).

Upgrade procedure

  • Start the TFTP server program and click Browse, and select the folder where the latest version of exi-x.x.x.x software files are located
TFTP32


  • Log on to the Secondary System Controller web interface. Default login credentials are admin and alphaadmin. Select Station Administration > Manual Upgrade
  • Enter the IP address of the TFTP server (I.e. the IP address of your PC)
  • Enter the image file: exi-x.x.x.x, and click Save settings
Secondary System Controller - Upgrade web interface


The station will now contact the TFTP server and download the files. The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.

Additional Information

Installing a TFTP server on your PC

  • Download the TFTP Server program tftpd64 standard edition (installer) from http://tftpd32.jounin.net/tftpd32_download.html.
  • For 32 bit computers download tftpd32 standard edition (installer)
  • Unzip the tftpdxx.yyy.zip file. (e.g. to C: \tftpdxx\)
  • Run the tftpdxx.exe file. The program is run by selecting the extracted .exe file, no installation is needed.
  • Turn off every thing except "TFTP Server" under Settings > Global. Escpecially important to turn off "DHCP Server", as this server part of the tftpxx application may interfere with other DHCP servers in the network
  • Select the base directory (e.g. C:\Software) by selecting the Settings > TFTP, then Browse
  • The TFTP Server program must be running during the software upgrade process

Troubleshooting

In the case the upgrade is not successful it may be due to a windows setting.