Difference between revisions of "Primary System Controller Upgrade"
Jump to navigation
Jump to search
(→Installing the Board Support Package) |
(→Installing the Board Support Package) |
||
| Line 29: | Line 29: | ||
* Browse to the downloaded bsp file, and select Upload. The file will now be transferred from the PC to the AMC-IP board. | * Browse to the downloaded bsp file, and select Upload. The file will now be transferred from the PC to the AMC-IP board. | ||
| − | [[File:AMC IP | + | [[File:AMC IP Upgrade 1.png|left]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
[[Category:How-To]] | [[Category:How-To]] | ||
Revision as of 09:06, 24 June 2016
The Exigo System Controller consist of two main components:
- Primary System Controller, PSC
- Secondary System Controller, SSC
This article describes how to upgrade the software on the Primary System Controller part of the Exigo System Controller.
The Primary system Controller (PSC) is also called:
- Domain Controller
- AMC-IP Board
Backup customer data
Configuration data might get lost after the upgrade.
The customer data MUST be backed up by doing a Get operation from Exigo Management Tool before the upgrade is performed.
Software Upgrade
The software upgrade is done in two steps:
- Installing the Board Support Package (bsp)
- Upgrading the alphasys package
Installing the Board Support Package
Download the latest Exigo firmware/software package and unzip the folder. This will contain all necessary software needed.
- Use an internet browser and log on to the AlphaCom Web interface (AlphaWeb) and select System Maintenance -> System Upgrade.
- Browse to the downloaded bsp file, and select Upload. The file will now be transferred from the PC to the AMC-IP board.
