Activity Indicator

Activity Indicator

The "Activity Indicator" function is a function which can be assigned to any dak button on any access panels. This will designate the complete button as an activity indicator which indicates activity in the selected zones with activite in the priority range.

This function can not be used on Control Inputs.

Settings

Parameters
Destination	Select which zones should be monitored for activity
Priority	Ignore activity which falls outside of this priority range

Use cases:

Case 1: Indicate alarm status

In this case the button was used to indicate that a specific alarm was used. To solve this the alarm got a unique priority and the "Activity indicator" was set to filter out all other activity. The alarm got priority 21.

Parameters
Destination	None
Priority	20-21

With the selected parameters the function will only check priority. As the alarm was the only alarm with priority 21 setting the priority field to a narrow selection of alarms between 20 and 21 no other activity will fullfill the requirements.

Case 2: Indicate activity in one zone

In this case the button was used to indicate that there was activity in zone 4 or zone 5.

Parameters
Destination	Zone 4 and zone 5
Priority	1-100

The settings will in effect ignore the priority field and only filter on zones. If there is any activity in either zone 4 or zone 5 the activity led will be triggered.

Availability

This function is available on Exigo 1.2 and newer.