Difference between revisions of "TKIS-2"

From exigoWiki
Jump to navigation Jump to search
(→‎TKIS-2 Overview)
 
(57 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
[[File:TKIS-2.jpg|thumb|alt=TKIS-2.|TKIS-2]]
+
[[File:TKIS 2.jpg|thumb|right|400px|alt=TKIS-2.|TKIS-2]]
 
'''Voip Intercom Module'''
 
'''Voip Intercom Module'''
  
 +
The Vingtor-Stentofon VoIP Intercom Module utilizes the latest technology to create unparalleled audio quality. Some of the many features include: HD voice quality, Open Duplex, Active Noise Cancellation, Automatic Volume Adjustment, MEMS microphone support, and a 10W Class D amplifier. These features, in conjunction with Vingtor-Stentofon's 70years of experience with acoustic technology are only a few of the many factors that make our audio quality second to none.
  
−
DESCRIPTION
+
With this kit you can:
−
The Vingtor-Stentofon VoIP Intercom Module utilizes the latest technology to create unparalleled audio quality. Some of the
 
−
many features include: HD voice quality, Open Duplex, Active Noise Cancellation, Automatic Volume Adjustment, MEMS
 
−
microphone support, and a 10W Class D amplifier. These features, in conjunction with Vingtor-Stentofon's 70years of
 
−
experience with acoustic technology are only a few of the many factors that make our audio quality second to none.
 
−
 
 
−
WITH THIS KIT YOU CAN:
 
 
* Build your own IP Intercom station or help point
 
* Build your own IP Intercom station or help point
 
* Vingtor-Stentofon Audio Presence - crystal clear audio
 
* Vingtor-Stentofon Audio Presence - crystal clear audio
 
* Make your own 10W IP Speaker
 
* Make your own 10W IP Speaker
 
* Control relay and I/Os over IP
 
* Control relay and I/Os over IP
−
* Supports Exigo, AlphaCom , Pulse and SIP (for use with any IPBX)
 
 
* Supports a wide set of IP networking standards
 
* Supports a wide set of IP networking standards
 
* DIN-rail mountable, clips included
 
* DIN-rail mountable, clips included
−
* Add VoIP/CCoIP to your parking solution, cash point, vending machine, et al
 
 
* Remote software upgrade, configuration and monitoring
 
* Remote software upgrade, configuration and monitoring
 
* Powered from the IP network cable using Power over Ethernet (PoE)
 
* Powered from the IP network cable using Power over Ethernet (PoE)
−
* Advanced audio technology like automatic gain and volume adjustment, background noise cancellation, open duplex, etc.
+
* Advanced audio technology like automatic gain and volume adjustment, background noise cancellation, open duplex, etc.<br>
 +
 
 +
== TKIS-2 Overview ==
 +
[[File:TKIS 2 overwiev 1.png|left|600px]]
 +
<br style="clear:both;" />
 +
 
 +
[[File:TKIS 2 overwiev 2.png|left|550px]]
 +
<br style="clear:both;" />
 +
{| border="1"
 +
| align="center" style="background:#ffd400;" width="50pt"| 1 || align="left"  | Power/Relay Inputs || align="left"| Programmable relay. Max: 250VAC/220VDC, 2A, 60W
 +
|-
 +
| align="center" style="background:#ffd400;" width="50pt"| 2 || align="left"  | I/O interface || align="left"| Interface for control inputs, control outputs and analog audio
 +
|-
 +
| align="center" style="background:#ffd400;" width="50pt"| 3 || align="left"  | External Audio || align="left"| Connection for microphone and optional external loudspeaker
 +
|-
 +
| align="center" style="background:#ffd400;" width="50pt"| 4 || align="left"  | Ethernet Port || align="left"| Ethernet connection with Power over Ethernet
 +
|-
 +
| align="center" style="background:#ffd400;" width="50pt"| 5 || align="left"  | DIN mounting clips || align="left"| Plastic clips for mounting the TKIS-2 to a DIN rail
 +
|-
 +
|}
 +
<br>
 +
 
 +
== Software Upgrade ==
 +
See article: [[Exigo Devices Upgrade]]
 +
 
 +
== Connections ==
 +
 
 +
[[File:TCIS Connections 1.PNG|thumb|left|400px|TKIS-2 - Connections]]
 +
<br style="clear:both;" />
 +
 
 +
The TKIS-2 has an RJ-45 PoE/LAN port, and 6-pin & 10-pin external connectors.
 +
 
 +
{| border="1"
 +
|Ethernet/Power|| 10/100 Mbps Ethernet RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line.
 +
|-
 +
|Secondary Power || 24 VDC (16 – 48 V) secondary power is provided from an external adapter.
 +
|-
 +
|Relays || There is one Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided.
 +
|-
 +
|Input/Output || 6 I/Os are available. Each I/O can be configured as either input, output, or LED driver.
 +
|-
 +
|Audio Line Out || A balanced 600 ohm audio line out with induction loop signal
 +
|}
 +
 
 +
{{Note}} Use cables crimped with ferrules for terminal block connectors
 +
 
 +
* When the TKIS-2 is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
 +
<br style="clear:both;" />
 +
 
 +
=== PCB - Front ===
 +
[[File:TCIS Connections 3.PNG|800px]]
 +
<br style="clear:both;" />
 +
 
 +
'''P1''' RJ45 PoE port for 10/100 Mbit Ethernet connection.
 +
:The station can be powered from this port if the line supports Power over Ethernet (PoE).
 +
 
 +
[[File:TCIS Connections 4.PNG|thumb|left|500px|RJ45 PoE port]]
 +
<br style="clear:both;" />
 +
 
 +
'''P2''' 5-pin plug-on terminal for external connections.
 +
:Pin 1/2  24 VDC for external secondary power if PoE is not used. Pin 1 is positive.
 +
:Pin 3  COM relay
 +
:Pin 4  NO relay
 +
:Pin 5  NC relay
 +
 
 +
{{Note}} The relay can switch and carry continously 60W power maximum.
 +
          So with maximum current 2A, it can take maximum 30V, or with maximum voltage 250VAC it can take maximum 240mA.
 +
 
 +
[[File:TCIS Connections 5.PNG|thumb|left|500px|'''P2''' - 5-pin plug-on terminal for external connection]]
 +
<br style="clear:both;" />
 +
 
 +
'''P4'''  Loudspeaker & Electret microphone
 +
:Pin 1  10W Speaker amplifier +
 +
:Pin 2  10W Speaker amplifier -
 +
:Pin 3  Electret Microphone +
 +
:Pin 4  Electret Microphone -
 +
 
 +
[[File:TCIS Connections 7.PNG|thumb|left|700px|'''P4''' - Loudspeaker & Electret microphone]]
 +
<br style="clear:both;" />
  
−
== Additional documentation ==
+
=== Input Connectors ===
 +
 
 +
'''P3'''  10-pin plug-on terminal for external connections.
 +
:Pin 1  5.3V (max. 200mA current)
 +
:Pin 2  GND
 +
:Pin 3  Button Input or LED Driver
 +
:Pin 4  Button Input or LED Driver
 +
:Pin 5  Button Input or LED Driver
 +
:Pin 6  Button Input or LED Driver
 +
:Pin 7  Button Input or LED Driver
 +
:Pin 8  Button Input or LED Driver
 +
:Pin 9  600 ohm balanced line out +
 +
:Pin 10  600 ohm balanced line out -
 +
 
 +
[[File:TCIS Connections 6.PNG|thumb|left|400px|'''P3''' - 10-pin plug-on terminal for external connections]]
 +
<br style="clear:both;" />
 +
 
 +
=== Output Connectors + 1 relay ===
 +
 
 +
[[File:TCIS Connections 12.PNG|thumb|left|500px|Connecting to the on-board relay. Extra LED controlled by output 1]]
 +
<br style="clear:both;" />
 +
 
 +
The extra relay for any of the 6 I/O pins is connected as shown:
 +
 
 +
[[File:TCIS Connections 14.png|600px]]
 +
 
 +
Most general purpose P-Channel MOSFET's should work. Recommended example: BSS84
 +
 
 +
The 5,3V output can deliver 200mA current maximum
 +
 
 +
== PCB - Rear ==
 +
[[File:TCIS Connections 8.PNG|800px]]
 +
 
 +
 
 +
'''J6'''  10-pin terminal for digital MEMS Microphone
 +
:Pin 1  Left mic select (Vdd)
 +
:Pin 2  Right mic select (GND)
 +
:Pin 3  Data
 +
:Pin 4  Data
 +
:Pin 5  Vdd 3.3V
 +
:Pin 6  Vdd 3.3V
 +
:Pin 7  CLK
 +
:Pin 8  CLK
 +
:Pin 9  GND
 +
:Pin 10  GND
 +
 
 +
[[File:TCIS Connections 9.PNG|thumb|left|700px|'''J6''' - 10-pin terminal for digital MEMS Microphone ]]
 +
<br style="clear:both;" />
 +
 
 +
== Restore Factory Defaults ==
 +
See article: [https://wiki.zenitel.com/wiki/TKIS_Restore_Factory_Defaults Restore Factory Default]
 +
 
 +
== Dimensions ==
 +
[[File:TKIS-2 dimensions.PNG|left|700px|TKIS-2 dimensions]]
 +
<br style="clear:both;" />
 +
 
 +
== Additional Documentation ==
 
For more documentation, please visit the Zenitel web page: https://www.zenitel.com/product/tkis-2
 
For more documentation, please visit the Zenitel web page: https://www.zenitel.com/product/tkis-2
−
 
  
 
[[Category:Hardware]]
 
[[Category:Hardware]]
 +
[[Category:Kits]]

Latest revision as of 15:34, 31 January 2019

TKIS-2.
TKIS-2

Voip Intercom Module

The Vingtor-Stentofon VoIP Intercom Module utilizes the latest technology to create unparalleled audio quality. Some of the many features include: HD voice quality, Open Duplex, Active Noise Cancellation, Automatic Volume Adjustment, MEMS microphone support, and a 10W Class D amplifier. These features, in conjunction with Vingtor-Stentofon's 70years of experience with acoustic technology are only a few of the many factors that make our audio quality second to none.

With this kit you can:

  • Build your own IP Intercom station or help point
  • Vingtor-Stentofon Audio Presence - crystal clear audio
  • Make your own 10W IP Speaker
  • Control relay and I/Os over IP
  • Supports a wide set of IP networking standards
  • DIN-rail mountable, clips included
  • Remote software upgrade, configuration and monitoring
  • Powered from the IP network cable using Power over Ethernet (PoE)
  • Advanced audio technology like automatic gain and volume adjustment, background noise cancellation, open duplex, etc.

TKIS-2 Overview

TKIS 2 overwiev 1.png


TKIS 2 overwiev 2.png


1 Power/Relay Inputs Programmable relay. Max: 250VAC/220VDC, 2A, 60W
2 I/O interface Interface for control inputs, control outputs and analog audio
3 External Audio Connection for microphone and optional external loudspeaker
4 Ethernet Port Ethernet connection with Power over Ethernet
5 DIN mounting clips Plastic clips for mounting the TKIS-2 to a DIN rail


Software Upgrade

See article: Exigo Devices Upgrade

Connections

TKIS-2 - Connections


The TKIS-2 has an RJ-45 PoE/LAN port, and 6-pin & 10-pin external connectors.

Ethernet/Power 10/100 Mbps Ethernet RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line.
Secondary Power 24 VDC (16 – 48 V) secondary power is provided from an external adapter.
Relays There is one Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided.
Input/Output 6 I/Os are available. Each I/O can be configured as either input, output, or LED driver.
Audio Line Out A balanced 600 ohm audio line out with induction loop signal 
Note.PNG Use cables crimped with ferrules for terminal block connectors
  • When the TKIS-2 is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.


PCB - Front

TCIS Connections 3.PNG

P1 RJ45 PoE port for 10/100 Mbit Ethernet connection.

The station can be powered from this port if the line supports Power over Ethernet (PoE).
RJ45 PoE port


P2 5-pin plug-on terminal for external connections.

Pin 1/2 24 VDC for external secondary power if PoE is not used. Pin 1 is positive.
Pin 3 COM relay
Pin 4 NO relay
Pin 5 NC relay
Note.PNG The relay can switch and carry continously 60W power maximum. 
          So with maximum current 2A, it can take maximum 30V, or with maximum voltage 250VAC it can take maximum 240mA.
P2 - 5-pin plug-on terminal for external connection


P4 Loudspeaker & Electret microphone

Pin 1 10W Speaker amplifier +
Pin 2 10W Speaker amplifier -
Pin 3 Electret Microphone +
Pin 4 Electret Microphone -
P4 - Loudspeaker & Electret microphone


Input Connectors

P3 10-pin plug-on terminal for external connections.

Pin 1 5.3V (max. 200mA current)
Pin 2 GND
Pin 3 Button Input or LED Driver
Pin 4 Button Input or LED Driver
Pin 5 Button Input or LED Driver
Pin 6 Button Input or LED Driver
Pin 7 Button Input or LED Driver
Pin 8 Button Input or LED Driver
Pin 9 600 ohm balanced line out +
Pin 10 600 ohm balanced line out -
P3 - 10-pin plug-on terminal for external connections


Output Connectors + 1 relay

Connecting to the on-board relay. Extra LED controlled by output 1


The extra relay for any of the 6 I/O pins is connected as shown:

TCIS Connections 14.png

Most general purpose P-Channel MOSFET's should work. Recommended example: BSS84

The 5,3V output can deliver 200mA current maximum

PCB - Rear

TCIS Connections 8.PNG


J6 10-pin terminal for digital MEMS Microphone

Pin 1 Left mic select (Vdd)
Pin 2 Right mic select (GND)
Pin 3 Data
Pin 4 Data
Pin 5 Vdd 3.3V
Pin 6 Vdd 3.3V
Pin 7 CLK
Pin 8 CLK
Pin 9 GND
Pin 10 GND
J6 - 10-pin terminal for digital MEMS Microphone


Restore Factory Defaults

See article: Restore Factory Default

Dimensions

TKIS-2 dimensions


Additional Documentation

For more documentation, please visit the Zenitel web page: https://www.zenitel.com/product/tkis-2

Retrieved from "https://exigo.zenitel.com/w/index.php?title=TKIS-2&oldid=16049"